• The Size of the Control and Instrumentation Laboratory is 106 square meter. Fully furnished laboratories with well-equipped equipments function to the needs of cater to all UG students as per curriculum requirements. The chairs and benches are in good condition. Chair is provided to individual student in the Laboratories. Fire Extinguishers are available in the laboratories for safety purpose.
• Laboratory manuals are distributed to the students. Sufficient numbers of windows are available for ventilation and the sun light and it has one exit.
• Lighting system is very effective, along with the sun light in all corners of the room. Laboratory is equipped with a white board, computers with sufficient hardware and licensed software to run program specific curriculum and beyond program curriculum.

List of major equipment

• PID kit.
• Personal computers.
• DC motor.
• Generator CRO 30MHz.
• 2MHz Function Generator.
• Position Control Systems Kit (with manual).
• AC Synchro transmitter& receiver.
• R, L, C Bridge kit (with manual).
• Electric heater.
• IC Transistor kit.
• Thermistor (silicon type) RTD nickel type.
• 30 psi Pressure chamber (complete set).
• Flow measurement Trainer kit (1/2 HP Motor, Water tank, Digital Milli ammeter, complete set).
• Optical sensor.
• Strain Gauge Kit with Handy lever beam.
• Single phase Auto transformer.
• Energy meter.

• The Electrical Machines lab is equipped with all types of AC and DC machines and Transformers mainly as per the B.E. program curriculum. Through hands-on experiments with real machines, students gain practical experience and knowledge.
• The size of the Electrical machine laboratory is 296.19 square meters. The Electrical machine workstation contains Composite Machine Benches (CMB) and Single Machine Benches (SMB).
• The complete instrumentation at the electrical workstation is placed with adequate clearance to facilitate experimental activities of students. The wiring for various power supply connections to the machines in each electrical machines work station are designed and established as per the norms of electrical standards.
• Fully furnished laboratories with well – equipped equipment required to all UG courses as per curriculum requirements are set up. All furniture including chairs and benches are in good condition. Chairs with desks are provided to every student in the Laboratories.
• Laboratory manual are distributed to students. Sufficient numbers of windows are available for ventilation and sun light with proper exit points.

Lighting is very effective, besides the sun light in all corners of the room. Electrical insulated Rubber mats are available in every Electrical machine workstation.

List of major equipment

• DC Shunt Motor with Loading Arrangement.
• Single Phase Transformer.
• DC Series Motor with Loading Arrangement.
• DC Shunt Motor Coupled With DC Compound Generator.
• DC Shunt Motor Coupled With DC Shunt Generator.
• Single Phase Resistive Loading Bank.
• Single Phase Auto Transformer.
• Single Phase Capacitive Loading Bank.
• DC Shunt Motor Coupled with Three phase Alternator.
• DC Shunt Motor Coupled with Three phase Slip ring Induction motor.
• Single Phase Inductive Loading Bank.
• Synchronous Motor 5HP.
• Three Phase Induction Motor with Loading Arrangement.
• Single Phase Induction Motor with Loading Arrangement.
• BLDC Motor.
• Three Phase Auto Transformer.
• Three Phase Resistive Loading Bank.

• The Power Electronics and Drives Laboratory is equipped with all the equipments required as per the curriculum. The Size of the Power Electronics and Drives Laboratory is 140.61 square meters. The laboratory is provided with proper ventilation and adequate number of windows.
• Lighting is very good, along with the sun light in all the corners of the laboratory. The Laboratory is equipped with a black board. The chairs/benches and stools are in good condition. The laboratory is provided with sufficient number of work benches.

 List of major equipment 

• Device characteristics (for SCR, MOSFET, TRIAC and IGBT kit with built in / discrete power supply and meters).
• Single phase SCR based half controlled converter and fully controlled converter along with built-in/separate/firing circuit/module and meter.
• MOSFET based step up and step down choppers (Built in/ Discrete).
• IGBT based single phase PWM inverter module/Discrete Component.
• IGBT based three phase PWM inverter module/Discrete Component.
• Switched mode power converter module/Discrete Component.
• SCR &TRIAC based 1 phase AC controller along with lamp or rheostat load.
• Cyclo converter kit with firing module.
• Dual regulated Dc power supply with common ground.
• Cathode ray Oscilloscope.
• Isolation Transformer.
• Single phase Auto transformer.
• LCR meter.

Power System Simulation Laboratory

• The Size of the Power system simulation Laboratory is 140.61 square meter. Fully furnished laboratories are established with computers equipped with sufficient hardware and licensed software to run program specific curriculum and beyond program curriculum.
• Laboratory manuals are distributed to the students. Sufficient numbers of windows are available for ventilation and the sunlight and it has one exit. Lighting is very effective besides the natural light in all corners of the room.
• Laboratory is equipped with a white board, 5 air conditioner, 7 fans, 10 CFL, 6 tube, UPS power back up and Fire Extinguishers.

List of major equipment

• Personal computers (Pentium-IV, 80GB, and 512 MB RAM).
• Printer laser.
• Dotmatrix
• Server (Pentium IV, 80GB, 1GBRAM) (High Speed Processor).
• Software: MIPOWER 5 licenses.
• Compliers: C, C++, VB, VC++.

Electric Circuits Laboratory

Electric Circuits Laboratory

• The Size of the Electric Circuits Laboratory is 106 square meter. Fully furnished laboratories with well-equipped equipments function to the needs of cater to all UG students as per curriculum requirements. The chairs and benches are in good condition. Chair is provided to individual student in the Laboratories. Fire Extinguishers are available in the laboratories for safety purpose.
• Laboratory manuals are distributed to the students. Sufficient numbers of windows are available for ventilation and the sun light and it has one exit.
• Lighting system is very effective, along with the sun light in all corners of the room. Laboratory is equipped with a white board, computers with sufficient hardware and licensed software to run program specific curriculum and beyond program curriculum.

List of major equipment

• Function Generator (1 MHz).
• Oscilloscope (20 MHz).
• Digital Storage Oscilloscope (20 MHz).
• PC With circuit Simulation Software (Mat Lab).
• Printer, Single Phase Wattmeter.

Engineering Practices Laboratory

• The Engineering Practices Laboratory is equipped with all the equipments required for all First Year UG courses as per the curriculum. The Size of the Engineering Practices Laboratory is 140.61 square meters. The laboratory is provided with proper ventilation and adequate number of windows.
• Lighting is very good, along with the sun light in all the corners of the laboratory. The Laboratory is equipped with a black board. The chairs/benches and stools are in good condition. The laboratory is provided with sufficient number of work benches.

List of major equipment

• Megger (250V/500V).
• Single Phase Energy Meter.
• Iron box.
• Fan and regulator.
• Emergency lamp.
• Range meter.
• Live wire detector.

INDUSTRIAL VISIT (2019-2020 EVEN SEM)

INDUSTRIAL VISIT (2018-2019 ODD SEM)

INDUSTRIAL VISIT (2018-2019 EVEN  SEM)

INDUSTRIAL VISIT (2017-2018 ODD SEM)

INDUSTRIAL VISIT (2017-2018 EVEN SEM)

INDUSTRIAL VISIT (2016-2017 ODD SEM)

INDUSTRIAL VISIT (2016-2017 EVEN SEM)